02214 - Arıza Kodu Teşhis Rehberi

Olası Belirtiler

• Tire Pressure Monitoring not working

Kök Nedenler ve Muhtemel Sebepler

• Sensör okuma hatası veya tesisat temassızlığı
• Mekanik aşınma veya hava kaçağı

Adım Adım Servis Çözüm Adımları

• Reset Tire Pressure Monitoring

VAG Grubu Özel Servis Notu:

When found in Seat Exeo (3R): Tire Pressure Monitoring II, perform System Reset. Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration. Clear/check Fault Codes. Switch the Ignition OFF. Kontrol edin: /correct the Tire Pressure. Switch the Ignition ON. Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up. When found in VW Golf (1K) or similar: Brake Electronics (MK60), perform System Reset When found in VW Golf (1K) or similar: Brake Electronics (MK70), perform System Reset When found in VW Passat (3C): Brake Electronics, perform System Reset When found in 2014-2015 Golf Mk6 based vehicles with MK60EC1 ABS check applicable TSBs and recalls. The following part numbers are noted for setting this DTC prior to the dealer level software updates: 1K0 907 379 BM with problematic software level 0163 and 0164 1K0 907 379 BS with problematic software level 0165 NAR (North American Region) Market Jetta, Beetle and Beetle Convertible see the 45D7 recall https://static.nhtsa.gov/odi/tsbs/2014/MC-10121604-9999.pdf NHTSA RoW (Rest of World) market Jetta and Beetle see TPI: 2037662 (or 2038535) Regardless of market the module will show 1K0 907 379 BS with software level 0166 (or higher) after the update was performed.