01435 - Arıza Kodu Teşhis Rehberi

Olası Belirtiler

• Malfunction Indicator Light (MIL) active
• Malfunction Indicator Light (MIL) active

Kök Nedenler ve Muhtemel Sebepler

• Basic Setting not performed
• Brake Pedal Switch (F) faulty/jammed
• Brake Pressure Sensör Okuma Değerleri 1 (G201) faulty
• Brake Pedal Switch (F) faulty/jammed
• Brake Pressure Sensör Okuma Değerleri 1 (G201) faulty

Adım Adım Servis Çözüm Adımları

• Perform Basic Setting
• Kontrol edin: /Değiştirin / Yenileyin: Brake Pedal Switch (F) See Measuring Blocks
• See Measuring Blocks
• Kontrol edin: /Değiştirin / Yenileyin: Brake Pressure Sensör Okuma Değerleri 1 (G201) ABS Hydraulic Unit (N55) may need to replaced Perform Brake Pump Bleeding Perform Brake Pressure Sensör Okuma Değerleri 1 (G201) Basic Setting Değiştirin / Yenileyin: Brake Electronics Control Module (J104)
• ABS Hydraulic Unit (N55) may need to replaced
• Perform Brake Pump Bleeding
• Perform Brake Pressure Sensör Okuma Değerleri 1 (G201) Basic Setting
• Değiştirin / Yenileyin: Brake Electronics Control Module (J104)
• Kontrol edin: /Değiştirin / Yenileyin: Brake Pedal Switch (F) See Measuring Value Blocks (MVB)
• See Measuring Value Blocks (MVB)
• Kontrol edin: Brake Pressure Sensör Okuma Değerleri 1 (G201) See Measuring Value Blocks (MVB)
• See Measuring Value Blocks (MVB)
• Kontrol edin: /Değiştirin / Yenileyin: Brake Electronics Control Module (J104) and/or ABS Hydraulic Unit (N55)

VAG Grubu Özel Servis Notu:

When found in Bosch ESP Brake Systems: The Bosh 5.x ABS modules drop communication at road speeds which makes it difficult, if not impossible, to log live measuring block data. If the Brake Light Switch is suspected as faulty and causing a G201 fault: Try logging the Engine or Transmission for brake light switching. Drive with the Cruise Control on and see if the system works as per design. If the CCS will not operate or the CCS does not shut off when the brakes are applied the Brake Light Switch may be faulty.